WAGO, 753-540 4-channel digital output; 230 VAC; 0.25 A; Solid-state – NEW IN BOX

PRODUCT DISCLOSURE:

All products were acquired by from a sale of merchandise subject to a commercial insurance loss. is a secondary seller of products, is not affiliated with or sponsored by the manufacturer of the products and is not a manufacturer authorized seller of the products. Sale of this product by is not subject to the policies of the manufacturer. Any warranty offered by the manufacturer is not available to you as the purchaser. All products are NEVER USED but external packaging will have damage. Some items may be placed into other packaging to ensure safe shipping. All items are opened for inspection prior to shipment to ensure the best quality of products. guarantees your satisfaction. If you are not completely satisfied with a purchased product, within 30 days from the date of purchase, return the product in its packaging and will fully refund your money.

This digital output module transmits control signals from the automation device to the connected actuators.

The module has four output channels and eight actuators may be connected to it.

The signal state of the outputs is shown by an LED.

Field and system levels are electrically isolated.

Notice:

An additional supply module must be added for 120 (230)VAC supply!

Note

Pluggable connectors and coding fingers (753 Series) are not included.

Technical data

Number of digital outputs 4 Number of Channels 4 Signal type Voltage Signal type (voltage) 5 250VAC Aktoranschluss 4 x (2-wire) Output characteristic high-side switching Output current per channel 0.25A Output current short-circuit-protected Protection against incorrect wiring Overvoltage protection (275 V) via varistor Load type resistive, inductive Short-circuit current max. 10 A (16 ms) ON voltage difference L-DO (max.) 1.2V Pull-in time (max.) 10ms Drop-out time (max.) 10ms Output data width (internal) max. 4bits Supply voltage (system) 5VDC;via data contacts Current consumption (5 V system supply) 18mA Supply voltage (field) 230VAC;via power jumper contacts (power supply via blade contact; transmission via spring contact) Isolation 1500V (system/field) Indicators LED (A-D) green: Status DO 1 DO 4 Number of incoming power jumper contacts 2 Number of outgoing power jumper contacts 2 Current carrying capacity (power jumper contacts) 10A

Connection data

Connection technology: inputs / outputs 8 x CAGE CLAMP Connection type 1 Inputs/Outputs Solid conductor 0.08 2.5mm/ 28 14AWG Fine-stranded conductor 0.08 2.5mm/ 28 14AWG Abisolierlnge 9 10mm/ 0.35 0.39inches

Physical data

Width 12mm/ 0.472inches Height 100mm/ 3.937inches Depth 69.8mm/ 2.748inches Depth from upper-edge of DIN-rail 62.6mm/ 2.465inches

Mechanical data

Mounting type DIN-35 rail Pluggable connector Pluggable

Material data

Color light gray Housing material Polycarbonate; polyamide 6.6 Fire load 0.868MJ Weight 41.4g Conformity marking CE

Environmental requirements

Ambient temperature (operation) 0 +55C Surrounding air temperature (storage) -25 +85C Protection type IP20 Pollution degree (5) 2 per IEC 61131-2 Operating altitude 0 2000m / 0 6562 ft Mounting position horizontal (standing/lying); vertical Relative humidity (without condensation) 95% Vibration resistance per IEC 60068-2-6 Shock resistance 15g per IEC 60068-2-27 EMC immunity to interference per EN 61000-6-2 EMC emission of interference per EN 61000-6-4 Exposure to pollutants Per IEC 60068-2-42 and IEC 60068-2-43 Permissible pollutant concentration H2S at a relative humidity < 75% 10ppm Permissible pollutant concentration SO2at a relative humidity < 75% 25ppm