LOT OF 10 – WAGO, 280-519 Double-deck terminal block – NEW NO BOX

Double-deck terminal block; Through/through terminal block; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm; CAGE CLAMP; 2,50 mm; gray/gray

PRODUCT DISCLOSURE:

All products were acquired by from a sale of merchandise subject to a commercial insurance loss. is a secondary seller of products, is not affiliated with or sponsored by the manufacturer of the products and is not a manufacturer authorized seller of the products. Sale of this product by is not subject to the policies of the manufacturer. Any warranty offered by the manufacturer is not available to you as the purchaser. All products are NEVER USED but external packaging will have damage. Some items may be placed into other packaging to ensure safe shipping. All items are opened for inspection prior to shipment to ensure the best quality of products. guarantees your satisfaction. If you are not completely satisfied with a purchased product, within 30 days from the date of purchase, return the product in its packaging and will fully refund your money.

Electrical data
IEC Approvals

Ratings per IEC/EN 60947-7-1 Rated voltage (III / 3) 500V Rated impulse voltage (III/3) 6kV Rated current 20A Legend (ratings) (III / 3) Overvoltage category III / Pollution degree 3

Power loss

Power loss, per pole (potential) 0.532W Rated current INfor specified power loss 20A Resistance value for specified, current-dependent power loss 0.001

Connection data

Connection points 4 Total number of potentials 2 Number of levels 2

Connection 1

Connection technology CAGE CLAMP Actuation type Operating tool Connectable conductor materials Copper
Aluminum Connectable conductor materials (note) Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4mm/12AWG if WAGO Alu-Plus Contact Paste249-130is used for termination.

Alu-Plus Contact Paste Advantages:

• Automatically destroys the oxide film during clamping.
• Prevents fresh oxidation at the clamping point.
• Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
• Provides long-term protection against corrosion.

Using terminal blocks with CAGE CLAMP Spring Pressure Connection Technology,aluminum conductors must first be cleaned with a bladeand then immediately be inserted into the clamping units filled with Alu-Plus Contact Paste.

It is also possible to apply WAGO Alu-Plusadditionallyon the whole surface of the aluminum conductor before termination.

Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::
2.5mm = 16A
4mm = 22A Solid conductor 0.08 2.5mm/ 28 12AWG Fine-stranded conductor 0.08 2.5mm/ 28 12AWG Note (conductor cross-section) 12 AWG: THHN, THWN Strip length 8 9mm/ 0.31 0.35inches Wiring direction Front-entry wiring

Physical data

Width 5mm/ 0.197inches Height 64mm/ 2.52inches Depth from upper-edge of DIN-rail 58.5mm/ 2.303inches

Mechanical Data

Design horizontal type Mounting type DIN-35 rail Marking level Center marking

Material Data

Note (material data) Information on material data can be found here Color gray/gray Material group I Insulation material Polyamide (PA66) Flammability class per UL94 V0 Fire load 0.11MJ Weight 10.1g

Environmental requirements

Processing temperature -35 +85C Continuous operating temperature -60 +105C

Commercial data

Product Group 1 (Rail Mounted Terminal Blocks) eCl@ss 10.0 27-14-11-20 eCl@ss 9.0 27-14-11-20 ETIM 8.0 EC000897 ETIM 7.0 EC000897 PU (SPU) 50pcs Packaging type box Country of origin CN GTIN 4050821293583 Customs tariff number 8536904000